ABB 2CTB815710R1900 OVR T1-T2 3N 12.5-275s P QS

Surge protective devices SPD type 1- type 2 protect low-voltage consumer systems against lightning currents and surge voltages as they are tested as SPD type 1 and type 2 according to IEC 61643-11. The devices are compatible with the System pro M compact series. The SPD with "TS" are optionally equipped with a auxiliary contact. The variants with "reserve varistor" (s) offer additional protection for the system, as the SPD is not completely disconnected from the mains at the end of its service life, but with an additional smaller varistor still guarantees basic protection and the system thus until the surge arrester is replaced is still protected

ABB 2CCS800900R0021 S800-AUX/ALT

Product: S800-AUX/ALT Auxiliary / Signal Contact

Product Code: 2CCS800900R0021

ABB 2CSF200989R0005 F2C-ARH-T100

The F2C-ARH-T device allows the auto-reclosing of the RCD it is associated to in case of unwanted tripping, only after having checked that there are no effective faults in the system protected by the RCCB. It is suitable for RCDs of F200 series, 2 poles with 100 mA sensitivity. F2C-ARH-T allows the RCCBs automatic test every six months.

ABB 2CSF200991R0005 F2C-ARH-T

The F2C-ARH-T device allows the auto-reclosing of the RCD it is associated to in case of unwanted tripping, only after having checked that there are no effective faults in the system protected by the RCCB. It is suitable for RCDs of F200 series, 2 poles with 30 mA sensitivity. F2C-ARH-T allows the RCCBs automatic test every six months.

ABB 2CSF200990R0005V F2C-ARH100

The F2C-ARH device allows the auto-reclosing of the RCD it is associated to in case of unwanted tripping, only after having checked that there are no effective faults in the system protected by the RCCB. It is suitable for RCDs of F200 series, 2 poles with 100 mA sensitivity.

ABB 2CSF200992R0005 F2C-ARH

Motor operator for automatic reclosure Function: F2C-ARH closes the associated residual current device (RCD) only after a test if there is no fault in the RCD protected system. Suitable for 2-pole residual current operated circuit breakers (RCCB) F202 with 30 mA rated residual current, max. 63 A

ABB 2CSF200995R0013 F2C-ARI30

The F2C-ARI device allows the auto-reclosing of the RCD it is associated to in case of unwanted tripping. It is suitable for RCDs of F200 series

ABB 2CSF200996R0013 F2C-ARI

The F2C-ARI device allows the auto-reclosing of the RCD it is associated to in case of unwanted tripping. It is suitable for RCDs of F200 series.

ABB 2CSS204997R0013 S2C-CM4

Die Motorantriebe S2C-CM erlauben die Fernsteuerung (Ein-/Ausschalten) der gekoppelten Geräte. Geeignet für 4-polige Sicherungsautomaten S204P bis 63 A.

ABB 2CSS203997R0013 S2C-CM2/3

The S2C-CM2/3 motor operating device has the function to allow the remote control (opening or closing) of the MCB it is associated to. It can assembled to 2 and 3 pole MCBs (up to 63A) of S200 range.

ABB 2CSS201997R0013 S2C-CM1

The S2C-CM1 motor operating device has the function to allow the remote control (opening or closing) of the MCB it is associated to. It can assembled to 1 pole MCBs (up to 63A) of S200 range.